VX-410 Accessories

CN-3 SMA to BNC Adaptor CT-124A VX-410/420 Firmware Cable. Requires FIF-8 CT-124B VX-410/420 Firmware Cable. Requires FIF-10A FIF-8 Firmware Writer. Unit comes with a cable...

CN-3 SMA to BNC Adaptor

CT-124A VX-410/420 Firmware Cable. Requires FIF-8

CT-124B VX-410/420 Firmware Cable. Requires FIF-10A

FIF-8 Firmware Writer. Unit comes with a cable for the muli-pin radios (VX-900, VX-4000, etc.). Please order the CT-92 cable for firmware updating of modular connector radios (VX-3200, VX-4200, VXR-9000, etc.). Powered by a PA-23B (not supplied).

ATU-6D 450-485 MHZ / RED / 6" / VX-10/160/180/210/400/600/800/900 ATU-6DS Antenna 450-485 MHz / 3.5" ATV-10A High Gain antenna, 145-155MHz (Red) / 10.5" ATV-10B High Gain...

ATU-6D 450-485 MHZ / RED / 6" / VX-10/160/180/210/400/600/800/900

ATU-6DS Antenna 450-485 MHz / 3.5"

ATV-10A High Gain antenna, 145-155MHz (Red) / 10.5"

ATV-10B High Gain antenna, 150-160MHz (Brn) / 10.5"

ATV-10C High Gain antenna, 155-165MHz (Blk) / 10.5"

ATV-10E High Gain antenna, 165-175MHz (Org) / 10.5"

ATV-6B Antenna 150-163 MHz / 3.5"

ATV-6C Antenna 161-174 MHz / 3.5"

ATV-6XL 7" untunned VHF antenna

ATV-8B Antenna 150-163 MHz / Sable / 6"

ATV-8C Antenna 162-174 MHz / Sable / 6"

FNB-83 1400mAh Ni-MH Battery FNB-V57IS 7.2 V 1100 mAh Ni-Cd Battery, Intrinsically Safe Version FNB-V67Li 7.2V 2000 mAh Lithium-Ion Battery for the VX-160 and VX-180 portables....

FNB-83 1400mAh Ni-MH Battery

FNB-V57IS 7.2 V 1100 mAh Ni-Cd Battery, Intrinsically Safe Version

FNB-V67Li 7.2V 2000 mAh Lithium-Ion Battery for the VX-160 and VX-180 portables. (Requires the VAC-810 charger)

VAC-10B 120 VAC 3-Hour Desktop Charger (Not recommended for use with LiIon Batteries) VAC-6010B The VAC-6010 is a rugged 6-Unit Multi Charger that enables recharging of Ni-Cd and Ni-MH...

VAC-10B 120 VAC 3-Hour Desktop Charger (Not recommended for use with LiIon Batteries)

VAC-6010B The VAC-6010 is a rugged 6-Unit Multi Charger that enables recharging of Ni-Cd and Ni-MH battery packs for HX370S/HX370SAS/VX-160/180/410/420 transceivers.

VAC-6010C The VAC-6010C is a rugged 6-Unit Multi Charger that enables recharging of Ni-Cd and Ni-MH battery packs for VX-160/180/410/420 transceivers.

VAC-6800B 6 UNIT Multi-Rapid Charger, 120VAC

VAC-6800C 6 UNIT Multi-Rapid Charger, 240VAC

VAC-6810B 120 VAC 6 UNIT Multi-Rapid Charger

VAC-800 Charge Stand Only for VCM-1 (Without Power Supply)

VAC-800B 120 VAC 1-Hour Desktop Charger

VAC-800C 240 VAC 1-Hour Desktop Charger

VAC-810 Charge Stand Only for VCM-1 (Without Power Supply)

VAC-810B 120 VAC 1.5 Hour Desktop Charger required for the FNB-V67Li High Capacity Battery.

VCM-1 Vehicular DC Charger Mounting Adaptor. Requires a charging base: VAC-400, VAC-800, etc.)

VCM-3 Vehicular Charger Mounting Adapyer Kit for VAC-10

VC-25 VOX HEADSET VX-110/150/160/180/210 VH-115S Lightweight Headset w/ Boom VH-215S Lightweight Padded Headset, Single Speaker VH-225S Lightweight Padded Headset, Dual...

VC-25 VOX HEADSET VX-110/150/160/180/210

VH-115S Lightweight Headset w/ Boom

VH-215S Lightweight Padded Headset, Single Speaker

VH-225S Lightweight Padded Headset, Dual Speaker

CT-106 FIF-10 to VX-160/180/410/420 Cable CT-27A Radio to radio cloning cable CT-28A Pigtail Cable CT-29A DB9 Cable CT-42A Computer to Radio Programming Cables....

CT-106 FIF-10 to VX-160/180/410/420 Cable

CT-27A Radio to radio cloning cable

CT-28A Pigtail Cable

CT-29A DB9 Cable

CT-42A Computer to Radio Programming Cables. (Contains CT-28A + CT-29A)

FIF-10A FIF-10A USB Interface for PC programming. Check specific models for additional cable pigtails. Pigtails not included.

INST-OPT Installation Charge

PROG/ADD Factory Radio Programming (Each additional channel after 1st)

PROGRAMMING Factory Radio Programming (single channel only)
VX MPI Programming Kit for the MDC1200 and the FVP-35

DVS-5 Digital Voice Storage Board (120 sec. max.) FVP-25 Encryption Unit (Band Inversion Type) and DTMF Paging. (requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000)...

DVS-5 Digital Voice Storage Board (120 sec. max.)

FVP-25 Encryption Unit (Band Inversion Type) and DTMF Paging. (requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000)

FVP-35 Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming

MDC1200 MDC1200 ANI Encoder. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming.

VMDE-200 BOARD FOR MDC1200 ENCODE/DECODE

VME-100 BOARD FOR MDC1200 DIGITAL ANI

MH-360S Compact Speaker Microphone for VX-210A, VX-160, and VX-180. Very similar to the MH-34D4B. MH-37A4B Earpiece Microphone, Light Duty MH-450S SPEAKER MICROPHONE MH-450S SPEAKER...

MH-360S Compact Speaker Microphone for VX-210A, VX-160, and VX-180. Very similar to the MH-34D4B.

MH-37A4B Earpiece Microphone, Light Duty

MH-450S SPEAKER MICROPHONE MH-450S SPEAKER MICROPHONE

MH-45B4B Speaker Microphone, Heavy Duty Public Safety Style w/Volume Switch, Intrinsically Safe