Products
Facebook Tweeter RSS Email page Print page
Home | Products | Base Stations & Repeaters | Discontinued Products | VXR-9000 Repeater and Base Station

VXR-9000 Repeater and Base Station

| 1 downloadable files
Vertex Standard VXR-9000e

High Performance and Reliable Repeater

  • 6 dual-function programmable keys
  • Provides flexible, automatic command sequence configuration
  • Capable of performing in base station or repeater mode 

The VXR-9000E is a 25-Watt repeater designed to ensure reliable service during peak spectrum congestion times. The slim-line design is crafted for easy installation and integration into most repeater sites.

The Vertex Standard VXR-9000E delivers the reliability, performance and extended range users demand with easy installation and integration to save time, all at an affordable cost. With its large channel capacity and priority scan capabilities, VXR-9000 provides for efficient communications monitoring. 

Designed for both high reliability and flexibility the VXR-9000 features an automatic command sequence, which allows for it to be programmed to perform a 5 step sequence of commands for certain operating events, such DC power failure and switch to low power status while sending a CW ID advising of the situation. 


The main features of VXR-9000e Repeater and Base Station

The VXR-9000E may be programmed with up to 32 channels over a wide frequency range and can perform in repeater or base station mode, depending on the application. Includes Priority Channel scanning capability for efficient communications monitoring.

Should DC power fail at the repeater site, the VXR-9000E will automatically revert to a backup DC power source, if connected. Under backup DC power, the repeater will transmit an alert message to notify the operator that immediate attention is required at the repeater site.

The VXR-9000E may be programmed to perform a five-step sequence of commands for certain operating events. For example, during a DC power failure and the repeater switches to a backup power supply, the repeater can be programmed to switch to low power and send a CW ID advising of the situation, etc.

The cooling fan diameter is 8 cm and thermostatically controlled to ensure a stable temperature environment for the VXR-9000E. Fan operation may be programmed for three options: off, continuous or temperature-controlled, depending on the application. A malfunction alarm is also included.

Frequency ranges:

  • VHF: 134-160 MHz (A), 146-174 MHz (C)
  • UHF: 400-430 MHz (A), 440-470 MHz (CS)

Features include:

  • Up to 32 channels
  • 6 dual-function programmable keys 
  • Power levels: 5/10/25 Watt
  • 47 CTCSS Tones/108 DCS Codes
  • Multi-tone decode 
  • Compander per channel
  • D-sub 25 pin accessory connector
  • Automatic DC backup switching w/alert
  • EIA rack mount size
  • CW ID Transmitter
  • CW Message
  • Continuous duty cycle operation up to 12.5 Watt Tx power
  • External DC power revert operation
  • Selectable encryption options
  • Two-tone set-up commands
  • Temperature controlled cooling fan
  • Four-wire line interface unit (optional)
 
 
Downloads
Vertex Standard VXR-9000e Repeater Base Station Specifications Sheet
Go up Contact Us